TM 55-2090-201-14&P
3-33. VESSEL SUB-ASSEMBLY, TYPE A AND B SEPARATOR (Continued).
LOCATION
ITEM
ACTION
REMARKS
23. Sole- a. Valve
noid
bonnet
Install valve bonnet (17),
coil
(13) and
(17)
with diaphragm and related
parts attached, to valve
valve
body with lockwashers (16)
bonnet
and screws (15).
(17)
b. Coil
(13)
(1) Install nipple (11) in
pulling elbow (12).
(2) Position baseplate (14)
over end of solenoid
base and secure to nip-
ple with locknut (10).
(3) Thread coil leads thru
pulling elbows and into
tee (4).
(4) Insert coil (13) over
end of solenoid base.
c. Coil
Position coil housing (9)
housing
and nameplate (8) over coil
(9)
(13) and secure with retain-
ing cap (7).
4.
Sensor Tee
12.
Pulling Elbow
7.
Retaining Cap
13.
Coil
8.
Nameplate
14.
Baseplate
9.
Coil Housing
15.
Bonnet Screw
10.
Locknut
16.
Lockwasher
11.
Nipple
17.
Valve Bonnet
3-209
