TM 55-2090-201-14&P
3-33. VESSEL SUB-ASSEMBLY, TYPE A AND B SEPARATOR (Continued).
LOCATION
ITEM
ACTION
REMARKS
27.
28.
NOTE
Carefully thread wiring back thru the various elec-
trical components.
Ensure that each wire matches
the tagged number, i.e. 4 to 4, 5 to 5, etc.
Supply
Insert wiring and cable (30),
pump
into tee (9) and secure by
motor
tightening collar (29). In-
leads
stall connectors (28) to
(27)
secure leads (27).
Solenoid
Thread coil leads (22) thru
valve
pulling elbow (25 and 31) and
coil
tee (11). Place coil (26)
over end of sub-base assembly
(32). Install locknut (24)
on elbow (25). Install con-
nectors (23) on leads (22).
NOTE
Install other two (2) solenoid valve coils in the
same manner.
9.
10.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
Tee
Tee
Leads
Connector
Locknut
Pulling Elbow
Coil
Leads
Connector
Collar
Wiring and Cable
Pulling Elbow
Sub-base Assembly
3-215
