TM 55-2090-201-14&P
3-37. AIR ELIMINATOR VALVE, TYPE A AND B SEPARATORS (Continued).
LOCATION
ITEM
ACTION
REMARKS
a.
Inspect "0" Rings for wear
or damage.
b. Inspect guide pins for
distortion.
c. Inspect valve body for
damaged threads.
Straighten if
distorted.
Dry cleaning solvent P-D-680 used to clean parts
is potentially dangerous to personnel and property.
Avoid repeated or prolonged skin contact.
Do not
use near open flame or excessive heat.
Flash point
of solvent is 100° - 138° F (38° - 59° C).
a. Clean valve body and
needle valve using clean-
ing solvent P-D-680 and
dry thoroughly.
b. Clean float using a clean
lint free cloth.
Replace damaged or defective
parts with serviceable-like
item.
3-231
