TM 55-2090-201-14&P
3-49.
MINI-PROBE, TYPE A AND B SEPARATORS (Continued).
L O C A T I O N
ITEM
A C T I O N
R E M A R K S
4.
Mini-
probe
a. Remove screws (1), cover
(2) and gasket (3).
b. Tag and disconnect leads
(4) from terminals (5).
C. Unscrew mini-probe (6).
Replacement
Installation
5.
Mini-
probe
(6)
6.
Replace defective mini-probe
with a serviceable-like item.
a. Screw into vessel.
Do not
overtighten.
b. Reconnect leads (4) to
terminals (5).
C. Position gasket (3) in
place on cover and install
cover (2) using screws (1).
Restart
Refer to paragraph 2-4.
system
Use thin wall
socket NSN
5120-00-277-
1465 with 1/2
inch (1.27 cm)
sq. drive rat-
chet.
Use thin wall
socket NSN
5120-00-277-
1465 to in-
stall.
3-396
