TM 55-2090-201-14&P
4-24. VESSEL SUB-ASSEMBLY, TYPE C AND D SEPARATORS.
This task covers:
a.
Removal
b.
Inspection
c.
Repair
d.
Installation
INITIAL SETUP
Test Equipment
None
Tools
Arc welder
Tool Kit, General Mechanics
Material/Parts
Sealing compound
Appendix C. Item No. 6
Vessel subassembly
Personnel Required
1
Equipment Condition
L O C A T I O N
ITEM
A C T I O N
R E M A R K S
1.
Draining
a. With the pump (1) running,
system
discharge as much oil as
possible from the separa-
tor stage which is to be
replaced according to the
following:
(1) Open the oil discharge
valve (2 or 3) on either
the first (prefilter) or
second stage (4 or 5).
(2) Close the water dis-
charge valve (6):
NOTE
Allow the oil to discharge for approximately one to
two seconds after the oil disappears from the sight-
glass before closing the oil discharge valve.
4-68
