TM 55-2090-201-14&P
4-28. FILTER SUPPORT - TYPE C AND D SEPARATORS (Continued).
LOCATION
ITEM
ACTION
REMARKS
c. Replace and center the
hold-down plate (4) over
the end cap of the filter
element.
d. Place O-ring (3), O-ring
retainer (2), and wingnut
(1) on the element support.
DO NOT use a wrench to tighten the wing nut, or the
filter element may be damaged.
e. Tighten the wing nut (1)
as tightly as possible
by hand.
1.
Wingnut
2.
"0" Ring Retainer
3.
"0" Ring
4.
Hold-down Plate
4-110
