TM 55-2090-201-14&P
4-30.
FIRST STAGE (PREFILTER) SEPARATOR - TYPE C AND D (Continued).
L O C A T I O N
ITEM
A C T I O N
R E M A R K S
5.
NOTE
Attach a sling to the separator.
Using a suitable
hoist take up enough slack from the sling to make
it taut before removing vessel mounting hardware.
Separator Remove nuts (1), washers (2),
Lift separator
mounting
(2), bolts (3) and washers
hardware
(4) securing separator to
from mounting
frame using
mounting frame (5).
hoist and set
on a flat sur-
face.
Block
sufficiently
to prevent
tipping over.
Detach hoist
1.
Nut
2.
Washer
3.
4.
Bolt
Washer
5.
Mounting Frame
4-125
