TM 55-2090-201-14&P
4-30.
FIRST STAGE (PREFILTER) SEPARATOR - TYPE C AND D (Continued).
LOCATION
ITEM
ACTION
R E M A R K S
c. Replace and center
hold-down plate (6) over
the end cap of the filter
element.
d. Place O-ring (5), O-ring
retainer(4),
and wing nut
(3) on the element stand.
DO NOT use a wrench to tighten the wing nut, or the
filter element may be damaged.
e. Tighten the wing nut (3)
as tight as possible by
hand.
3.
Wingnut
4.
"0" Ring Retainer
5.
"0" Ring
6.
Hold-down Plate
4-131
