TM 55-2090-201-14&P
4-31.
SECOND STAGE SEPARATOR - TYPE C AND D.
This task covers:
a.
Removal
c.
Replacement
b.
Service
d.
Installation
INITIAL SETUP
Test Equipment
None
Tools
Tool Kit, General Mechanics
Material/Parts
Sealing compound
Appendix C. Item No. 6
Separator
Lint free cloths
Detergent
Bucket
Personnel Required
1
Equipment Condition
L O C A T I O N
ITEM
ACTION
R E M A R K S
1.
Draining a. With the pump (1) running
system
discharge as much oil as
possible from the 2nd
stage separator according
to the following:
(1) Open the oil discharge
valve (2) on the
second stage (3).
(2) Close the water dis-
charge valve (4):
NOTE
Allow the oil to discharge for approximately one to
two seconds after the oil disappears from the sight-
glass before closing the oil discharge valve.
4-138
