TM 10-4610-229-10
2-4.
ASSEMBLY AND PREPARATION FOR USE (CONT)
NOTE
This procedure begins at product water end of reverse osmosis block assembly.
Part of this procedure requires two personnel.
g.
Installation of Reverse Osmosis Membrane Elements
1
Tag (item 13, appendix D) all rigid tube and flexible tubes for reinstallation.
2
Loosen rigid tube nut at manifold. DO NOT remove. Using ratchet handle, extension, and
crowfoot wrench (section III, appendix B, items 2, 1, and 6), remove rigid tube nut from end cap
assembly. Swing tube away from end cap assembly.
3
Loosen flexible tube nut. Remove flexible tube from end cap assembly.
2-86