c. Replacement of Terminal Strip.
Refer to Figure 4-9, sheet 3, View A and insert tool in slot at side of terminal strip.
Carefully pry out the strip to be removed.
Refer to Figure 4-9, sheet 3, View B and install new strip by alining terminal strips and pressing downward with
Figure 4-9. Terminal Strips (sheet 3 of 3)
REPLACEMENT OF RING TONGUE TERMINALS.
a. Cut terminal (1, Figure 4-10) from wires (2) as close to terminal insulator (3) as possible.
b. Strip wire end, using wire stripper tool, to the length of the new terminal insulator (5) being installed.
c. Slide new terminal (1) onto exposed wire end (4) and crimp securely at the center of the insulator (5).
Figure 4-10. Ring Tongue Terminal