3-26. ELECTRICAL CABLE W46 (HIGH AND LOW PRESS SWITCH) MAINTENANCE -continued.
HIGH PRESSURE SWITCH CABLE (W46)
Slide nut (12), sealing grip (14), adapter (15) and new O-ring (17) on high pressure switch cable (1)
Pull high pressure switch cable (1) through wall of electrical junction box (16) and position cable grip
Install locknut (18) on adapter (15)
Working inside electrical junction box, position three wires (20) as tagged and secure with three screws (19)
Working at high pressure switch end slide nut (2), sealing grip (14) and adapter (3) on cable (1)
Pull wires through pressure switch, and connect three wires (11) as tagged and secure with three screws (10)
and install locknut (5).
Tighten nut (2)
Position gasket (6) and cover (7) in place and secure with four lockwashers (8) and screws (9)