WATER TANK - Continued.
Repair - Continued.
(4) Apply patch in
(5) After repairing
accordance with instructions supplied with
water tank, allow adhesive to dry thoroughly.
This will take 24 hours at 75°F (24°C), or 2 hours at 140°F
Always use dry heat.
DECONTAMINATING APPARATUS (DRIVE BELTS).
This task consists of:
INITIAL SETUP :
Tool Kit, General Mechanics
Tool Kit from Accessory Box
Wrench Set, Combination
Socket Set, Metric
Engine shutdown and cool.
Replace water pump belts
Release four fasteners (3) and
in pairs only.
then remove panel (4).
Depress fuel pump (7) to release tension on fuel pump belt (5).
Remove fuel pump belt (5) from fuel pump (7) and drive pulley
Loosen two water pump belt tensioner bolts (8) and move tension-
er (9) to the left.
Grasp outside belt (2) and while turning water pump pulley
(6), pull the belt toward the outside and remove belt.