CAUTION - EPROM's are sensitive to static electricity. They are supplied Inside a plastic conductive tube or
Inserted In conductive foam. Do not remove them from this tube or foam until they are to be Installed.
Never lay them on any surface except Inside this tube or on the foam.
b. Remove an EPROM by prying It out of the socket with a small screwdriver or I/C extractor tool. WARNING:
Do not pry socket out of board.
c. Insert EPROM In the socket with the notch on the end of the EPROM corresponding to the outline drawn on
the PC Board. (Do not use stick-on labels for orientation reference).
Check that all pins are In the socket. None bent under.
Recheck EPROM orientation before applying power.
Section 9 - Page 3