• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Rilsan Outer Jacket Repair
PROGRESSIVE ELIMINATION OF OUTER JACKET DAMAGE

TM-55-1930-209-14P-6 Water Purification Barges (NSN 1930-01-234-2165) Chlorination System Manual
Page Navigation
  546    547    548    549    550  551  552    553    554    555    556  
in the Scope of Supply of the Coflexip Drinking Water Discharge System, to assure that tools and material will be readily available.  The Rilsan outer jacket repair kit is comprised of the following components: - One hot air gun with air supply unit - Three (3) air nozzles - 1/2" Stainless steel bands with clamps and wrench - Six (6) lbs. of Rilsan wire - Tool box and consumables Basically, the repair consists of melting the Rilsan material and applying it firmly, similarly to caulking.  Both temperature and pressure are required to make a proper repair. The hot air gun should be set on 3, and held approximately one (1) inch from the repair area. In most cases, it is not necessary to add Rilsan material; it is usually easier and better to melt Rilsan from around the damage (cut, tear, etc...) and use that base material to fill in the damage. If necessary, and depending on the size of the damage, stainless steel bands can be used to hold the Rilsan outer jacket during and after the repair. See figure VI-3 and VI-4.







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.