TM 10-4320-317-13
b. Storage Assemblies (Figure 1-3).
Figure 1-3. Storage Assemblies
(1) FILLER/DISCHARGE ELBOWS (1 and 3). Directs waterflow from hose assembly into storage tank
when filling tank Directs waterflow from tank during discharge.
(2) VENT ASSEMBLY (2). Opens when internal pressure reaches 0.1 psi.
(3) STORAGE TANK (4). The 20,000 gallon, collapsible, rubberized-nylon fabric storage tank supplies
TWDS distribution point or may be used for water storage. Comes with kit for temporary and
permanent repairs. Refer to applicable technical manual for setup and maintenance procedures.
(4) DRAIN HOSE AND DRAIN ASSEMBLY (5). Allows water to drain from storage tank
(5) DISCHARGE HOSE ASSEMBLY (6). The 4 in. X 10 ft hose assembly feeds water from hoseline and
gate valve assembly to filler fitting on storage tank.
(6) 4-INCH GATE VALVE (7). Used to control water flow into storage assembly.
1-5
