TM 10-4610-215-24
TM 08580A-24/2
Figure 2-69. Terminal Block (Typical)
c. Inspection.
(1) Inspect terminal blocks for cracks, breaks, and signs of burning.
(2) Inspect screws and nuts for damaged heads and threads.
d. Repair or Replace.
(1) Replace all damaged screws, nuts, or washers.
(2) Replace damaged or worn electrical wires.
(3) Replace damaged or burned terminal block.
e. Installation. (Figure 2-69)
(1) Hold terminal block (7) in mounting position.
(2) Insert four screws (6) through mounting panel and terminal block (7).
(3) Install four flat washers (5), four lockwashers (4), and four nuts (3) on screw (6).
(4) Install terminal screws (1) with wire lugs (2) attached.
2-135
