TM 10-4610-215-24
TM 08580A-24/2
CHAPTER 3
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
3-1. COMMON TOOLS AND EQUIPMENT. For authorized common tools and equipment, refer to the Additional
Authorization List, Appendix D.
3-2. SPECIAL TOOLS AND SUPPORT EQUIPMENT. The only special tool required is a deadweight gage
tester, (refer to Appendix B, Section Ill).
3-3. TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE). For authorized TMDE refer to the
MTOE applicable to your unit.
3-4. REPAIR PARTS. Repair parts and equipment are listed in the Repair Parts and Special Tools List (RPSTL)
for the ROWPU. (ARMY) Refer to TM 10-4610–215-24P USMC personnel refer to SL-4-08580A.
Section II. TROUBLESHOOTING
3-5. DIRECT SUPPORT MAINTENANCE TROUBLESHOOTING. This paragraph provides information for
locating and correcting problems at the direct support level. Table 3-1 lists troubles for each item or group of
items, followed by a series of tests or inspections and corrective actions. This table cannot list all troubles that
may occur, nor list all possible tests and corrective actions. If a problem is not listed, or is not corrected by the
listed actions, notify your supervisor.
3 -1
