TM 10-4610-215-24
TM 08580A-24/2
(6) Install rotor shaft (27) in motor casing (23) and fan-end plate (21).
(7) Align prepunched indexing marks on motor casing (23) and pump-end plate (29).
(8) Install pump-end plate (29) in motor casing (23) with four bolts (20).
(9) Install two grease plugs (22) on fan-end plate (21) and pump-end plate (29).
(10) Install Woodruff key (26) on rotor shaft (27).
(11) Install fan (19) on rotor shaft (27).
(12) Install holding clamp (18) over split hub of fan (19) and install three screws (17).
(13) Install fan cover (15) on fan-end plate (21).
(14) Install four screws (16) through fan cover (15) and far-end plate (21).
(15) Align lead cover (13) and new gasket (14) on motor casing (23).
(16) Install four screws (12) through lead cover (13), new gasket (14), and motor casing (23).
(17) Align conduit box (10) and new gasket (11) in place on lead cover (13).
(18) Install three screws (8) and three lockwashers (9) through conduit box (10), gasket (11), and lead
cover (13).
(19) Install grounding stud (7) through conduit box (10) and lead cover (13).
(20) Install nut (5), ground lug (6), and second nut (5) on grounding stud (7).
(21) Align conduit box cover (3) and new gasket (4) in place on conduit box (10).
(22) Install four screws (1) and four lockwashers (2) through conduit box cover (3), gasket (4), and conduit
box (10).
(23) Install pump on motor. (Refer to paragraph 4-2.)
3-27
