TM 10-4610-215-24
TM 08580A-24/2
(7) Remove split ring (6) from plunger (7).
(8) Remove plunger (7) from bushing screw (5).
(9) Remove adjusting nut (8) from bushing screw (5).
(10) Remove gland nut (9) from pump body (2).
(11) Remove holder bushing (10) from pump body (2).
(12) From inside pump body (2), remove gland sleeve (11), two bushing guides (12), four packing rings
(13), and two more bushing guides (12). Discard packing rings (13).
(13) Hold studs (22) in place against pump body (2) and remove two nuts (14) from studs (22).
(14) Remove flange (15) from studs (22) and valve carrier (16).
(15) Remove valve carrier (16) and seal ring (17) from ball valve (18). Discard seal ring (17).
(16) Remove ball valve (18) and seal ring (19) from pump body (2). Discard seal ring (19).
NOTE
Note the position of ball valve (18) (up or down).
(17) Turn pump body over and remove two nuts (20) from studs (22).
(18) Remove flange (21) from studs (22) and valve carrier (23).
(19) Remove studs (22) from pump body (2).
(20) Remove valve carrier (23) and seal ring (24) from ball valve (25). Discard seal ring (24).
(21) Remove ball valve (5) and seal ring (26) from pump body (2). Discard seal ring (26).
NOTE
Note position of ball valve (up or down).
d. Disassembly. (Figure 3-30) (USMC)
(1) Remove pump block assembly in accordance with paragraph 3-30.
3-129
