TM 10-4610-215-24
TM 08580A-24/2
g. Repair or Replace.
(1) Replace all gaskets, O-rings, packing rings, and seal rings.
(2) Replace all damaged or unserviceable nuts, bolts, studs, screws, adjusting nuts, bushing screws, and
washers.
(3) Replace damaged, bent or unrepairable plungers, valve carriers, gland nuts, pump bodies, holder
bushings, split rings, and ball valves.
(4) Repair pump stroke adjustment control assembly in accordance with paragraph 3-33.
h. Reassembly. (Figure 2–29 (ARMY)
(1)
(2)
(3)
(4)
(23).
(5)
(6)
(7)
(8)
(9)
(16).
Insert seal ring (26) and ball valve (25) in pump body (2).
Insert seal ring (24) and valve carrier (23) in ball valve (25).
Insert studs (22) in pump body (2).
Hold studs (22) in place against pump body (2) and insert flange (21) on studs (22) and valve carrier
Install two nuts (20) on studs (22).
Turn pump body over.
Insert seal ring (19) and ball valve (18) in pump body (2).
Insert seal ring (17) and valve carrier (16) in ball valve (18).
Hold studs (22) in place against pump body (2) and insert flange (15) on studs (22) and valve carrier
(10) Install two nuts (14) on studs (22).
(11) Insert two bushing guides (12) and gland sleeve (11 ) into pump body (2).
(12) Slip holder bushing (10) over pump body (2).
(13) Loosely install gland nut (9) into pump body (2).
(14) Install adjusting nut (8) on bushing screw (5).
(15) Place two split rings (6) on plunger (7).
(16) Slide plunger (7) and split rings (6) into bushing screw (5).
(17) Install bushing screw (5) with plunger attached, into pump rod.
3-132
