TM 10-4610-215-24
TM 08580A-24/2
(11 ) Remove nipple (12) from tee (11) and half union (1).
(12) Remove flow control (10) from tee (9).
(13) Remove nipple (13) from tee (9) and diaphragm valve (5).
(14) Remove pipe (14) with flange (15) attached, from elbow (25).
(15) Remove flange (15) from pipe (14).
(16) Remove tee (16) with adapter (17) , elbow (18), and nipple (19) attached, from strainer (20).
(17) Remove strainer (20) with nipple (21) attached, from bushing (22).
(18) Remove nipple (19) from tee (16)
(19) Remove adapter (17) from tee (16).
(20) Remove elbow (18) from tee (16).
(21) Remove nipple (21) from strainer (20).
(22) Remove pipe (23) with attached tee (24), bushing (22), and elbow (25),
(23) Remove bushing (22) from tee (24).
(24) Remove three elbows (25) and nipples (25A) from valve assembly (31).
(25) Remove flange (26) from nipple (27) and nipple (27) from elbow (28).
(26) Remove elbow (28) from nipple (29) and remove nipple (29) from valve assembly (31).
(27) Remove pipe assembly (30) from valve assembly (31).
f. Disassembly, Multimedia Filter Control Valve Assembly. (Figure 3-41)
NOTE
Procedure for cartridge removal is typical for six valves on the
control valve assembly.
(1) Remove four screws (1) from cap (2) and valve body (3).
(2) Remove cap (2) from valve body (3).
(3) Lift out cartridge assembly (4) from valve body (3).
(4) Remove cartridge gasket (5) from valve body (3). Discard cartridge gasket (5).
3-163
