TM 10-4610-215-24
TM 08580A-24/2
Table 2–1 Unit Maintenance Checks and Services Monthly Schedule
Item
Item to be
No.
Inspected
Procedures
1
Trailer Tires
2
Backwash Pump
Distribution
Pump
Raw Water Pump
Valves
Storage Box
Check for proper inflation, 75 psi (5.27 kg/crop).
Check pump frame assembly for bent rails, broken
welds, or missing hardware, and schedule for repair. Inspect
power cable for cracked insulation and damaged cable plug.
Replace if needed. Check pump strainer assembly for cracks
or damage. Remove fittings from strainer. If damaged, replace.
Check pump frame assembly for bent rails, broken
welds, or missing hardware, and schedule for repair or
replacement. If cable shows severe cracks, or plugs have bent
pins, cracked or broken shells, replace plugs or entire cable.
Check pump frame assembly for bent rails, broken
welds, or missing hardware, and schedule for repair or
replacement. If cable shows severe cracks, or plugs have bent
pins, cracked or broken shells, replace plugs or entire cable.
Check valves for cracks, leaks, and ease of operation.
Replace bad valves and send damaged valves to be repaired.
Check storage boxes for serviceable condition. If
hinges, lids, or hardware are bad, schedule them for repair or
replacement. If boxes need preservation painting, schedule for
repair.
WARNING
ELECTRICAL HIGH VOLTAGE
Electricity can cause serious injury or death. Be certain that all
power is removed before performing maintenance on electrical
equipment.
2-5
