TM 10-4610-229-10
3-5. CARTRIDGE FILTER ELEMENTS REPLACEMENT (CONT)
4
Remove and discard all filter elements. Inspect upper and lower spiders for loose or damaged seal. Install
loose seals. If any seals are damaged, notify your supervisor.
b.
Installation. For installation of filter elements, see paragraph 2-4f, steps 5 thru 14.
3-6. HIGH PRESSURE PUMP ENGINE AIR FILTER SEKVICE
This task covers servicing only.
INITIAL SETUP
Supplies
Rags, item 10, appendix D
1
Open six latches. Remove cover. Remove air filter.
2
Wipe filter housing and cover clean.
3
Tap filter gently on hard surface to remove dirt and debris.
4
Install air filter. Install cover. Close six latches.
3-24