TM 10-4610-229-24
2-36. VALVE ADJUSTMENT (CONT)
2
Turn engine crankshaft in direction of rotation, bringing engine to top dead center (tdc). Tdc is one-quarter to
one-half of a turn after inlet valve closes.
3
Loosen locknut.
4
Insert feeler gage between rocker arm and valve stem end.
NOTE
Valve clearance is correctly adjusted when a slight drag is felt on feeler gage. Intake and exhaust
valve clearance is 0.008 in.
5
Adjust screw until slight drag is felt on feeler gage.
6
Tighten locknut. Recheck valve clearance.
7
Install valve cover (para 2-35).
2-37. OIL PAN REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Use With
Supplies
Raw Water Pump Assembly
Rags, item 29, appendix C
Oil, item 24, appendix C
Tools
Equipment
General Mechanic's Automotive
Condition
Tool Kit, item 10, appendix B
Para
Condition Description
2-24
Oil drained.
2-89