TM 10-4610-229-24
NOTES:
1. Identify correct cable.
2. Strip 1/2 in. (1.3 cm) insulation from cable end.
3. Heat cable terminal. Fill with solder.
4. Insert cable into terminal.
5. Install battery cable lug. Will have solid crimp.
Find
Part or
Qty
Nomenclature
Specification
No.
Identifying No.
Req.
or Description
No.
1
E8509-1
1
Cable Assembly
2
E8509-2
1
Cable Assembly
3
E8453
1
Cable Assembly
4
MS75004-1
4
Lug, Terminal, Positive
5
MS20659-142
1
Lug, Terminal, Negative
6
MS25036-137
1
Lug, Terminal
Figure D-7. High Pressure Pump Battery Cable Assembly
D-13