TM 10-4610-232-12
2-16. EMERGENCY STOP (Figure 2-39).
Figure 2-39. Emergency Stop
CAUTION
The emergency stop button should be pushed only when equipment failure or another
problem demands immediate shutdown. Do not use the emergency stop button for routine
shutdown.
Push the EMERGENCY STOP button (1) to immediately stop all motors within the ROWPU.
NOTE
See paragraph 2-20 for start up after emergency stop.
2-17. FIRST START-UP OR START-UP FROM SECURED OR DRAINED CONDITION. Follow this procedure when starting the
ROWPU for the first time after movement, when the ROWPU is started from the drained condition, or when it is started from secured
shutdown condition.
NOTE
For start-up from Temporary Shutdown (para. 2-22) or Long Term Shutdown (para. 2-23)
complete the procedures of para. 2-15 before continuing.
WARNING
Use caution when using chemicals (polyelectrolyte, sequestrant, citric acid, NTP-A,
detergent, calcium hypochlorite, sodium bisulfite). Failure to do so could result in severe
burns, especially to eyes. Always wear chemical protective gloves and a face shield. If a
chemical comes in contact with skin or clothes, wash off immediately. If a chemical comes
in contact with eyes, wash eyes immediately for 15 minutes from the eyewash station.
2-72
