TM 10-4610-232-12
b.
Remove elbow (1), valve (2), nipple (3), quick disconnect and dust cap (4) and tee (5). Remove gasket (6) from dust cap (4).
c.
Loosen wing nuts (32) on T-bolt (35) and swing cover (10) up to allow access to gasket (7).
d.
If necessary, remove gasket (7). It will be necessary to pry the gasket out of its groove in cover (10).
e.
If necessary, remove pins (8) and (9) and remove cover (10).
f.
Remove clamp (11), cap (12) and gasket (13).
g.
Remove clamp (14), cap (15) and gasket (16).
h.
Remove clamp (17), hose (18), nipple (19), valve (20), nipple (21), elbow (22) and nipple (23).
i.
Remove adapter (24), valve (25), nipple (26), elbow (27), nipple (28) and elbow (29).
j.
If necessary, remove C-ring (30), washer (31) and wing nut (32). Drive out roll pin (33), remove pin (34) and T-bolt (35) is free.
REPAIR.
a.
Repair leaking fittings using antiseize tape.
b.
Replace damaged gaskets and damaged or missing pads.
c.
Be sure gasket seating surfaces are clean before attempting to install gaskets.
d.
Clean the groove carefully to allow reinstallation of a new gasket.
REASSEMBLY.
NOTE
Use antiseize tape on all male pipe threads.
a.
If removed, install T-bolts (35) and secure with pin (34) and roll pin (33). Install wing nut (32) and secure with washer (31) and
C-ring (30).
b.
Clean out the bore in the tank into which elbow (29) fits and install elbow (29), nipple (28), elbow (27), nipple (26), valve (25)
and fitting (24).
c.
Install nipple (23), elbow (22), nipple (21), valve (20), nipple (19). Install hose (18) on nipple (20) and secure with clamp (17).
d.
Install gasket (16) on cap (15) and secure with clamp (14).
e.
Install gasket (13) on cap (12) and secure with clamp (11).
f.
If removed, install gasket (7) in cover (10)
g.
Place cover (10) on top of tank (36) and install pins (9 and 8).
h.
Tighten wing nuts (32) around the perimeter of the tank.
i.
Install gasket (6) in dust cap (4) and install tee (5), quick disconnect and dust cap (4), nipple (3), valve (2) and elbow (1).
j.
Install media (para. 3-29).
4-258
