TM 10-4610-232-12
4-77. ELECTRIC HEATER. This task covers:
a. Removal.
b. Disassembly.
c. Repair.
d. Reassembly.
d. Installation.
INITIAL SETUP.
Tools, see Appx B, Sec III, Ref Code (No.):
Materials/Parts:
Tool Kit, General Mechanics Automotive (1)
Varnish, Electrical (Appx E, Sec II, Item 73)
Equipment Condition:
Lockwashers (TM 10-4610-232-24P)
Electrical power disconnected from heater.
Washers (TM 10-4610-232-24P]
Circuit breaker CB17 turned off in main
General Safety Instructions:
control (Figure 2-4).
WARNING
Observe specific Warnings in the text.
—
WARNING
Make sure electrical power is disconnected before working on unit. Failure to do so
could result in serious injury or death from electrical shock or moving parts.
WARNING
Unless circuit breaker CB17 is turned off, there will be power to the heater even
though the ROWPU is shutdown. Be absolutely sure the circuit breaker is off before
working on the heater.
Figure 4-87. Electric Heater
Change 2 4-281
