TM 10-4610-232-12
(11)
Refer to Figure 4-92 and check the alignment of sheaves (2 and 3) by placing the straightedge (1) across
the faces of the sheaves. If the sheaves are not aligned, move motor (4) to bring the sheaves into proper alignment.
(12)
Recheck belt (5) tension as described above. Then tighten four nuts (6).
(13)
Install belt guard (9, Figure 4-89) and secure with two capscrews (6), lockwashers (7) and washers (8).
Install air filter (5), clamp (4), and secure with screw (3).\
(14)
Return the straightedge to the high-pressure pump belt guard
Figure 4-92. Air Compressor Sheave Alignment
4-287
