TM 10-4610-239-24
TM 08580B-24/3
2-47. SECURE AIR CHAMBER COMPRESSION SPRING.
This task covers:
a. Cage. b. Uncage.
INITIAL SETUP.
Tools.
Tool Kit (Appx B, Sect III, Item 10).
CAGE.
NOTE
This procedure must be done to all four air chambers before reservoir air
pressure is released.
a.
Remove dust cap (1).
b.
Remove nut (2), flat washer (3), and release stud (4) from side sleeve (5).
c.
Insert release stud (4) through hole at end of chamber (6) to engage notches on spring seat (7).
2-81
