TM 10-4610-239-24
TM 08580B-24/3
REMOVAL.
WARNING
Compressed air can blow dust into eyes. Wear eye protection and turn drain
cock T-handle slowly to avoid a sudden rush of air when releasing
reservoir pressure.
a.
Turn drain cock T-handle (1) slowly counterclockwise to release air pressure from reservoir.
b.
Remove tube fitting (2) from hydraulic tube fitting (3).
c.
Remove hydraulic tube fitting (3) and associated parts from reservoir (4).
CAUTION
Use wrench only on wrenching portion (5) of drain cock (6). Using wrench
on any other part of drain cock can damage drain cock.
d.
Remove drain cock (6).
e.
Remove four locknuts (7) and cap screws (8).
WARNING
The reservoir is heavy. Two people are needed to lift it to prevent personal
injury or damage to the equipment.
f. Slide reservoir (4) off two beams (9) and lower it to ground.
INSTALLATION.
WARNING
The reservoir is heavy. Two people are needed to lift it to prevent personal
injury or damage to the equipment.
a.
Position reservoir (4) on two beams (9) and install four cap screws (8) and new locknuts (7).
CAUTION
Use wrench only on wrenching portion (5) of drain cock (6). Using wrench
on any other part of drain cock can damage drain cock.
b.
Apply antiseize tape to threads of drain cock (6) and install drain cock.
c.
Apply antiseize tape to threads of hydraulic tube fitting (3) and install hydraulic tube fitting and
associated parts on reservoir (4).
2-87
