TM 10-4610-239-24
TM 08580B-24/3
ASSEMBLY. (Cont)
c.
Install disk retainer (13), gasket (14), disk plate (15), flat washer (16), and nut (17) on shaft (12).
d. Install new O-ring gasket (21) and O-ring (11) on plug (10).
e. Install shaft assembly (12) in plug (10) and screw in plug (10) into valve body (20).
f.
Install spring (9).
g. Install washer (5), washer (8), and washer (5) on end of shaft (12).
h. Install lower diaphragm plate (6), and diaphragm (7) and upper diaphragm plate (6) onto shaft (12).
i.
Install washer (5) and nut (4) on shaft (12).
NOTE
Locate cap on valve body and align scribe marks.
j.
Attach cap (3) to valve body (20) and tighten four bolts (2) and nuts (1).
2-204
