TM 10-4610-239-24
TM 08580B-24/3
3-23. REPLACE MULTIMEDIA FILTER CONTROL VALVE. (MECO)
This task covers: a. Removal. b. Installation.
INITIAL SETUP.
Tools.
Tool Kit (Appx B. Sec III, Item 10).
REMOVAL.
CAUTION
If pressure lines are not reinstalled properly, damage/failure of
equipment will occur.
a. Tag and disconnect 11 pressure lines (1).
b. Remove 10 nuts (2) and bolts (3).
c.
Remove five clamps (4) gaskets (5).
d. Remove U-bolt (6), two nuts (7) and lockwashers (8).
WARNING
Multimedia filter control valve with attached plumbing weighs
over 75 pounds (34 kg). Two people are required to lift it to
prevent personal injury or damage to the equipment.
e. Lift filter control valve (9) with attached plumbing from crossmember (10).
f.
Remove pipe (11) and elbow (12). Remove nipple (13).
g. Remove pipe (14), elbow (12) and nipple (13).
h. Remove pipe (15) and bushing (16) from elbow (17). Remove nipple (13).
i.
Remove pipe (18) and elbow (19). Remove nipple (13).
j.
Remove pipe sub-assembly (20).
k.
Remove two nuts (21), bolts (22), clamp (23) and gasket (24).
1. Remove pipe (25) and pipe (26).
m. Remove tee (27).
n. Remove pipe (28) and elbow (29).
3-131
