TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-71. CARTRIDGE FILTER MAINTENANCE
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Chain Hoist (Appendix B, Section III, Item 3)
Pipewrench (Appendix B, Section III, Item 3)
Material/Parts Required
Tape, Anti-seize (Appendix C, Section II, Item 30)
Lockwasher (2) - MS35338-139
Gasket (2) - M10387D04
Gasket- M103873D02
Personnel Required
Three (3)
Equipment Condition
Reference
ROWPU shutdown (TM 10-4610-240-10).
Power shutdown (power source manual)
ROWPU piping drained (TM 104610-240-10).
Cover plate removed (para 2-36)
General Safety Instructions
WARNING
Lifting heavy/difficult to handle equipment incorrectly can cause serious injury.
REMOVAL
a.
Release quick-disconnect (37) and remove flexible tubing (36).
b.
Loosen clamp (5) and remove flexible tubing (4).
c.
Unscrew tubing (7) from adapter (8).
d.
Remove two nuts (9) and screws (13), clamp halves (10), and gaskets (11).
e.
Remove two nuts (14) and screws (17), clamp halves (15), and gasket (16).
f.
Loosen union (19) and remove pipe section (18).
g.
Remove two nuts (35) and screws (34), clamp halves (33), and gasket (32).
h.
Loosen hose clamp (26) and remove flexible tubing (27).
i.
Remove two nuts (3), lockwashers (2), screws (28), flat washers (29) and bracket (30).
Discard lockwashers.
2-256
