TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-80. DIAPHRAGM VALVE MAINTENANCE - continued.
REPAIR - cont
(8)
Install spring (13), lower diaphragm plate (12), diaphragm (11), and upper diaphragm plate (10) on shaft
(29).
(9)
Install nut (9) on shaft (29) and aline bolt holes in diaphragm (I 1) with bolt holes in body (21)
(10)
Install cap (8), tag (30), four screws (31), and nuts (20) on body (21).
INSTALLATION
a.
Apply anti-seize tape to male fittings. Be sure to wrap tape in same direction as pipe thread
b.
Install diaphragm valve (7) on pipe section (6) Make sure valve is positioned as shown.
c
Install pipe section (1) on diaphragm valve (7).
d.
Install gasket (4), clamp halves (3), two screws (2) and nuts (5)
e.
Install control valve (pare. 2-79).
f
Operate ROWPU (TM 10-610-240 10). Check for leaks and correct operation.
2-286
