TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-81. R.O. PRESSURE TUBES MAINTENANCE (MODEL WPES 1) - continued.
e
At opposite end of R.0 pressure tube (6), remove two nuts (17) and bolts (14), clamp halves (15), and
gasket (16).
NOTE
There are four R O pressure tubes. All are removed the same One is shown,
the others are similar.
f.
Remove two nuts (24), lockwashers (23), and flat washers (22) from brackets (18)
g
Remove two nuts (21), lockwashers (20), and screws (19) from brackets (18).
h.
Remove two brackets (18), flat washers (27), and nuts (28) from R.O. pressure tube (6).
WARNING
The R 0. pressure tube is heavy. Two people are needed to lift it to prevent
personal injury or damage to the equipment
i.
Remove R.O. pressure tube (6) from frame (25-.
j.
Remove two supports (26) from frame (25).
2-290