TM 10-4610-241-24
TO 40W4-13-42
2-19.
CABLE ASSEMBLY, W43 AND W44 (RAW WATER PUMP) REPLACE - continued.
b.
Test.
CAUTION
The following tests are performed to determine if the cable assembly is defective.
Before testing, cable assembly must be disconnected from the motor. Failure to
disconnect cable can result in false test indications.
Make sure wire terminals (11) are not touching each other.
(1) Using multimeter, test for continuity between plug (24) pins and wire terminals (11) as follows:
CABLE ASSEMBLY W43 - W44 CONTINUITY TEST
FROM
TO
PIN
WIRE COLOR
A
BLACK
B
WHITE
C
RED
D
GREEN
(2) If continuity does not exist between two points, notify Direct Support Maintenance.
2-102
