TM 10-4610-241-24
TO 40W4-13-42
2-31.
TUBING REPLACE - continued.
(b) Connect flexible tubing (17) to tubing adapters (18 and 19) and tighten clamps (16 and 15).
(2) Install metal tubing as follows:
NOTE
Be sure to wrap tape in same direction as pipe thread.
(a) Apply anti-seize tape to male fittings.
(b) Connect metal tubing (7) to adapters (13 and 14) and tighten tubing nuts (11 and 12).
(c) Install clamps (10), lockwashers (9) and screws (8) on metal tubing (7).
(d) Position two tube support blocks (4 and 5) and insulation tape (6) on metal tubing (7).
(e) Install two screws (3), lockwashers (2), and nuts (1).
(3) Operate ROWPU and check for leaks (TM 10-4610-241-10).
2-142
