TM 10-4610-241-24
TO 40W4-13-42
2-71. R.O. PRESSURE TUBES REPAIR - continued.
(3)
(4)
(5)
(6)
(7)
On models WPES-10 and H-9518-1, remove two clamps (9), then remove one flat washers (7). and one nut
(8) from each clamp (9).
On models WPES-20, H-9518-2, WPES-30 and H-9518-3, remove four nuts (4), lockwashers (5), screws
(6) and clamps (10).
Remove R.O. pressure tube (12) from bases (11).
Remove two bases (11) from frame (13).
WARNING
R.O. pressure tube is heavy. Two people are needed to lift it to prevent injury to
personnel or damage to equipment.
As required, remove glued-on rubber cushions (14 and 15).
Change 1 2-277