TM 10-4610-241-24
TO 40W4-1342
2-84. AIR CLEANER ASSEMBLY (BRAKES) REPLACE (WPES-l0 AND H-9518-1) - continued.
b.
Service.
(1)
Disassembly.
(a)
Remove pipe plug ( 10) from bushing adapter ( 11).
NOTE
Bushing adapter is under spring tension. Hold bushing adapter and housing while
releasing pressure.
(b)
Remove bushing adapter (1l), gasket (12). compression spring (13), spring tension washer (14),
and filter element (15) from body (16).
(2)
(3)
(4)
(5)
Cleaning.
(a)
Using clean water and detergent, wash dirt and grease from all parts.
(b)
Using clean water, rinse all parts. Dry with wiping rag.
Inspection.
(a)
Inspect spring ( 13) and spring tension washer (14) for cracks and deformity. Replace air cleaner
assembly if damaged.
(b)
Inspect pipe plug ( 10), bushing adapter ( 11) and housing ( 16) for cracks, deformity, or damaged
threads.
Repair.
(a)
Replace filter element.
(b)
Replace damaged components.
Assembly.
(a)
Position filter element ( 15), spring tension washer ( 14) and compression spring ( 13) in body ( 16).
CAUTION
Compression spring causes resistance to installation of bushing adapter. Lack of
attention while installing bushing adapter can cause thread damage. Install bushing
adapter carefully.
(b)
(c)
Install gasket ( 12) and bushing adapter ( 11) on body ( 16).
Install pipe plug (10) on bushing adapter (11).
2-338 Change 1
