TM 10-4610-241-24
TO 40W4-13-42
Table 3-1. Direct Support Troubleshooting - continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BACKWASH PUMP ASSEMBLY -continued
d.
If open, repair cable assembly, W52. Refer to Paragraph 3-27.
e.
Ifcontinuity does not exist through K2 contacts and/or 90-120 Ohms is not
measured between A1 and A2, replace motors starter. Refer to Paragraph 3-61.
f.
If wiring is defective, tighten loose connections and/or replace defective wire.
3-85
