TM 10-4610-241-24
TO 40W4-13-42
3-5.
THREADED INSERTS AND HELICOILS- continued.
(12)
Loosen setscrew (6).
(13)
Turn handle until shaft (7) extends past tip of insertion tool (8) slightly longer than length of new insert
(9).
(14)
Screw insert (9) onto shaft until tang (10) of insert goes into shaft notch (11).
(15)
Using insertion tool (8) and vernier caliper, adjust distance (12) between end (13) of insert (9) and tip
(14). Turn handle until distance is equal to installation depth below surface of tapped hole.
(16)
Push down stop collar (15) until it contacts body of insertion tool (8).
(17)
Tighten setscrew (6).
3-106
