TM 10-4610-241-24
TO 40W4-13-42
3-43.1
HIGH PRESSURE PUMP (R.O. PUMP) MOTOR REPAIR (MODELS H-9518-1, H-9518-2, AND
H-9518-3) - continued.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Carefully position rotor (15) inside stator (16).
Install slinger (19) in bracket ( 17).
Install four studs (24) into stator (16).
Slip bracket ( 17) over shaft of rotor (15) and align with stator (16) as marked during disassembly.
Position spring washer (23) on shaft of rotor (15).
Position bracket (12) over shaft of rotor (15) and align bracket (12) with stator (16) as marked during
disassembly.
Install four nuts ( 18).
Install deflector (14) on shaft of rotor (15).
Align fan (13) on shaft of rotor (15) and push fan onto shaft of rotor.
Position fan cover (11) on bracket (12) and install four nuts (10).
3-244.4 Change 1
