TM 10-4610-241-24
TO 40W4-13-42
3-44.1
HIGH PRESSURE PUMP (R.O. PUMP) REPAIR (MODELS H-9618-1, H-9518-2, AND
H-9518-3) - continued.
(17)
Place plate (43) onto the outlet connector (44). Install o-ring (46) onto the outlet connector (44).
(18)
Slide the outlet connector (44) into the manifold assembly (53). Insert the split ring (45) into the groove on
the outlet connector (44) and push the plate (43) down.
(19)
Secure the plate (43) with four bolts (41) and four lockwashers (42).
(20)
Place plate (37) onto the inlet connector (38). Install o-ring (40) onto inlet connector (38).
(21)
Slide the inlet connector (38) into the manifold assembly (53). Insert the split ring (39) into the groove on
the outlet connector and push the plate (37) down.
(22)
Secure the plate (37) with two screws (34), two lockwashers (35) and two flatwashers (36).
(23)
Install drain fitting (33) on side of pump.
(24)
Install high pressure hose fitting (32) on outlet nipple of the pump (16).
(25)
Install the reducer (3 1) and cam-lock fitting (30) on the inlet nipple of the pump (16).
(26)
Place adapter (29) on pump (16) and secure with four screws (27) and four lockwashers (28).
(27)
Place coupling half (25) and key (26) on pump shaft. Secure with two setscrews (24).
CAUTION
The pump assembly must be supported as it is removed from the motor due to its weight
(60 lbs.). Two people are necessary.
3-254.8 Change 1
