TM 10-4610-241-24
TO 40W4-13-42
3-53.
JUNCTION BOX ASSEMBLY REPAIR - continued.
(2) Remove four screws (3) and flat washers (4), securing circuit breaker plate (5) and insulator plate (6) to
standoff(15).
WARNING
Care must be exercised when tilting plate to prevent damage to wiring and circuit
breaker connectors.
(3) Tilt circuit breaker plate (5) forward to access mounting hardware.
(4) Remove three nuts (7), lockwashers (8) and screws (9).
(5) Position insulator plate (6) and circuit breaker plate (5) on standoffs (15) and install four screws (3) and flat
washers (4).
(6) Close junction box cover (2) and turn 13 rotary fasteners (1) clockwise.
WARNING
Junction box assembly is heavy/difficult to handle Three people are needed to
support/lift it to prevent injury to personnel or damage to the equipment.
(7) Support junction box assembly (14) and remove nine nuts (10), lockwashers (11), flatwashers (13) and
screws (12).
(8) Remove junction box assembly (14).
3-303
