TM 10-4610-241-24
TO 40W4-13-42
3-53.
JUNCTION BOX ASSEMBLY REPAIR - continued.
(2) Control relays (low pressure [K8] and high pressure [K9] relays).
NOTE
There are two control relays in the electrical junction box assembly. Removal of K8 is
shown, the other relay, K9, is removed in similar manner.
NOTE
Tag all wires, indicating their connection points before removal from relays.
(a) Remove six screws (34) and eight wires (35) from control relay, K8 (40).
(b) Remove two screws (36), lockwashers (37), flatwashers (38) and control relay, K8 (40).
(c) Repeat procedure for relay, K9 (39).
(d) As required, remove nuts (41), lockwashers (42), flatwashers (43), screws (44) and bracket (45).
3-306
