TM 10-4610-241-24
TO 40W4-13-42
3-60. WIRING HARNESS, W40 REPAIR (MODELS WPES-20 AND H-9518-2) - continued.
a.
Repair.
Repair wiring harness in accordance with TM 43-0158/TO 1-1A-15 (Air Force).
d.
Installation.
(1)
(2)
Position gasket (10) on wiring harness (9).
Position wiring harness (9) in cutout on junction box (16) and install cap (7), screws (6),
flatwashers (5), lockwashers (4) and nuts (3).
(3)
Connect wires to components in junction box in accordance with information stamped on
wires.
(4)
If removed, install cable clamps (15) with screws (14), flatwashers (13), lockwashers (12)
and nuts (11).
(5)
Tug wiring harness (9) inside clamp (15) and close clamps with tiedown straps (8).
(6)
As required, secure wiring harness (13) to other harnesses with tiedown straps (8)
Change 1 3-333
