TM 3-4230-209-1 0
Item
Location, Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
26
BEFORE
a. See that no parts are
Resistor is
and
missing and that hardware
missing.
QUARTERLY
Assembly
fastening the assembly to
the base is not loose or
missing.
BEFORE
b. Check that the electrical
Cables are
cables are fastened at both
damaged or
terminals.
missing.
BEFORE
c. Check that pulley is not bent
Pulley is bent
and
or cracked.
or cracked.
QUARTERLY
WARNING
Fire and explosion danger
exist when dry cleaning
solvent (SD) is used.
Make sure that equipment
is dry before operations
begin.
QUARTERLY
d. Clean exterior of
altemator/generator with
cloth dampened with dry
cleaning solvent (item 10,
Clean V-belt groove of pulley
with a cloth dampened with
dry cleaning solvent (item
10, app D). Dry thoroughly.
Remove any rust and
corrosion with a wire brush
(item 5, app D).
Change 2 2-43
