TM 3-4230-209-10
Item
Location, Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
28
BEFORE
Tank Unit
a. Check that tank is fastened
and
to skid base assembly.
QUARTERLY
BEFORE,
b. Check that suction hose,
AFTER, and
and exhaust pipe extensions
QUARTERLY
are stowed properly on top
of the tank unit.
BEFORE
c. Inspect for broken welds,
Tank leaks
and
leaks, obstructions, loose
continuously.
QUARTERLY
pipe fittings, and missing
parts.
QUARTERLY
d. Check that the markings and
identific ation plates for the
drain, agitator, and blender
connectors are legible and
firmly fastened.
AFTER and
e. Inspect the tank interior to
QUARTERLY
see that it is clean and no
slurry has accumulated or
hardened on the tank walls.
QUARTERLY
f. Clean tank with hot, soapy
water. Remove any slurry
which may have accumulated
using brush (item 5, app D).
Rinse with clear water.
Remove rust and corrosion
with wire brush (item 5, app
(item 21, app D).
Change 2 2-45
